Manufacturers:
Gaggenau
- Control panel for comfortable and safe handling
- Mechanical step regulation for precisely adjustable and reproducible flame size in 9 power levels
- Multi-circuit burners made of robust, heat-resistant brass as used in professional kitchens
- Smooth cast iron grates
- Up to 18 kw on 5 burners
more details
- Control panel for comfortable and safe handling
- Mechanical step regulation for precisely adjustable and reproducible flame size in 9 power levels
- Multi-circuit burners made of robust, heat-resistant brass as in professional kitchens
- Smooth cast iron grates
- Up to 18 kw on 5 burners
Cooking zones
- 1 multi-circuit wok burner (300 w - 6000 w), suitable for pots up to max. ø 32 cm.
- 2 heavy-duty burners with 2 flame circuits (170 w - 4000 w), suitable for pots up to max. ø 28 cm.
- 2 normal burners with 2 flame circuits (170 w - 2000 w), suitable for pots up to max. ø 24 cm.
Operation
- Control knob with illuminated ring.
- Integrated control panel.
- One-hand operation.
- Electric ignition.
Equipment
- Three-piece cast iron grate with level, continuous pot surface.
- Brass burner rings.
Safety
- Thermoelectric flame control.
- Residual heat indicator.
- Operation indicator.
Planning information
- Special nozzles for liquid gas 50 mbar must be ordered as spare parts.
- No intermediate shelf required.
- Unit can be snapped into the worktop from above.
- Rear wall and wall end strips must be heat-resistant and made of non-combustible material.
- Installation in at least 90 cm wide base cabinet recommended.
- Ensure a lateral distance of at least 300 mm to heat-sensitive furniture parts or surfaces or install heat-insulating insulation.
- If the total power of the installed gas cooktops exceeds 11 kw, the local regulations regarding room ventilation, room size and combination with extractor hoods in exhaust or recirculation mode must be observed. Above 11 kw total power, the minimum distance to an extractor hood is 70 cm.
- Unit weight: approx. 29 kg.
Connection data
- Total connected load gas 18.0 kw.
- Total connected load electric 10 w.
Product safety information
Manufacturer information:
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
Bayern
München, Deutschland, 81739
www.bsh-group.com
https://www.bsh-group.com
-
Product series200 series
-
Type of construction: Built-in
-
Controlmechanical
-
Controls: Cylinder toggle
-
Energy sourcegas
-
Control position: Front
-
Gas type: natural gas h/e/(l) 20 (25) mbar
-
Main surface material: stainless steel, brushed
-
Color unit: stainless steel
-
Frame design: standard frame
-
Frame colorstainless steel
-
Gas connection value: 18000 w
-
Fuse protection: 10
-
Connected load: 10 w
-
Voltage: 220-240 V
-
Frequency: 50-60 TPU00040
-
Approval certificatesvDE
-
Length connection cable150 cm
-
Plug type: Schuko/Gardy.w.grounding
-
Device height13,2 cm
-
Device width91,4 cm
-
Device depth51 cm
-
Packed unit height29 cm
-
Width packed unit70 cm
-
Depth packed product101 cm
-
Minimum niche height10,6 cm
-
Maximum niche height10,6 cm
-
Minimum niche width88,5 cm
-
Maximum niche width88,5 cm
-
Niche depth49,2 cm
-
Net weight: 28,6 kg
-
Gross weight: 30,9 kg
-
Energy intelligent device, can optimize consumption behavior (2017/1369/EU): No
-
Wireless communication possible: No
-
Network broadband technology: Not applicable
-
SIM card slot availableno
-
Remote upgrade capability: No
-
Cooking zone power: 0.3-6 w
-
Operation indicator light: Yes
-
Cover type : Without
-
Type of pot support: Cast iron pot support
-
Type of gas safety device: Electromagnetic for each burner
-
Ignitionyes
-
Residual heat indicator: Separate
-
Main switchno
-
Electronic clockno
-
Included accessories: 1 x wok attachment ring
-
Possibility to combine cooking zones/areas: No
