Manufacturers:
Gaggenau
- Five multi-circuit burners, up to 17.8 kW
- Fully electronic level control in 12 power levels
- Solid stainless steel knob, also available with a black, robust surface, for precise control and personalization< /li>
- Precisely processed 3 mm thick stainless steel
- Choice of surface-mounted installation with a visible edge or discreetly integrated flush with the surface
further details< li>Five multi-circuit burners, up to 17.8 kW- Fully electronic level control in 12 power levels
- Solid stainless steel knob, also available with a black, robust surface, for precise control and personalization
< li>Precisely processed 3 mm thick stainless steel- Choice of surface-mounted installation with a visible edge or discreetly integrated flush with the surface
- Exactly adjustable and reproducible flame sizes
- Automatic quick ignition, electronic flame monitoring with automatic re-ignition
- Simmering level for simmering at the lowest power level
- Smooth cast iron grates
- Can be perfectly combined with other Vario devices from the 400 series
Cooking zones
- 1 multi-circuit wok burner (300 W – 5800 W), suitable for pots up to a maximum diameter of 32 cm.
- 2 high-powered burners with 2 flame circles (165 W – 4000 W), suitable for pots up to max. ø 28 cm.
- 2 normal burners with 2 flame circles (165 W - 2000 W), suitable for pots up to max. ø 24 cm.
ul>Operation
- Control knob with illuminated ring, cooking zone and power marking.
- One-handed operation.
- Fully electronic control for precise regulation of the 12 power levels plus Simmering level.
- Automatic quick ignition.
Equipment
- Simmering level.
- Three-part cast iron grate with flat, continuous pot surface .
- Brass burner rings.
Safety
- Electronic flame monitoring with automatic re-ignition.
- Residual heat indicator.< /li>
- Safety shutdown.
Planning information
- Depending on the type of installation (top-mounted or flush, with or without device cover) on the specific definition of the cutout and Pay attention to the knob positions.
- The knobs can be positioned horizontally in coordination with the burners.
- If the panel thickness exceeds 23 mm, the sketch "Mounting the control knob" must be observed (the back must be left out
- When combining several Vario devices from the 400 series, a VA 420 connecting strip must be used between the devices. Depending on the type of installation, provide appropriate connecting strips.
- The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take the weight of the device including additional load into account.
- Additional information for flush installation:
- The installation is suitable for worktops made of stone, synthetic material or solid wood. Heat resistance and waterproof sealing of the cut edges must be taken into account. For other materials, please consult the worktop manufacturer regarding use.
- The groove must be continuous and even to ensure that the devices rest evenly on the seal. Do not use selective lining.
- The joint width can vary due to dimensional tolerances of the combinations and the worktop cutout.
- When installing several devices in individual cutouts, a web width of 50 mm must be planned between the individual cutouts.
- Special nozzles must be ordered as spare parts.
- Provide an electrical connection (the device cannot function without a power supply).
- Air intake from above.
< li>No intermediate floor required.- The back wall and wall trim strips must be heat-resistant and made of non-combustible material.
- Maintain a lateral distance to heat-sensitive furniture parts or surfaces of at least 300 mm or install heat-insulating insulation .
- Installation in 90 cm wide base cabinet possible.
- If the total output of the installed gas hobs is over 11 kW, the local regulations regarding room ventilation, room size and combination with extractor hoods in exhaust air or recirculation mode apply note.
- The minimum distance from the hob surface to a piece of furniture made of combustible material mounted above it is 76 cm.
- The minimum distance to a built-over extractor hood must be observed in the planning instructions for the individual extractor hood.< /li>
- A combination with VL 414 is not recommended as efficient extraction from the middle burner is not guaranteed.
- The device can be snapped into the worktop from above.
- Device weight: approx. 30 kg.
Connection data
- Total gas connection value 17.8 kW.
- Total electric connection value 15 W.
- Connection cable 1.4 m with plug.
| Item information |
Value |
| Color: |
stainless steel |
| Product type: |
Hob module |
| Device width: |
90cm |
| Controls: |
|
| Item weight: |
30,00 kg
|
| Modellbezeichnung: |
VG491115 |
| WEEE-Reg.-Nr. DE: |
57986696 |
Product safety information
Manufacturer information:
BSH Hausgeräte GmbH
Carl-Wery-Straße 34
Bayern
München, Deutschland, 81739
www.bsh-group.com
https://www.bsh-group.com
-
Product series: Series 400
-
Design: Built-in
-
Control: Electronic
-
Energy source: Gas
-
Location of the control: Outside the device
-
Gas type: Liquefied gas 50 mbar (DE,AT,CH)
- Main surface material< /b>: Stainless steel, brushed
-
Color of device: Stainless steel
-
Basic color of the product: Not applicable
< li>Frame version: Professional, standard frame-
Frame color: Stainless steel, stainless steel
-
Gas connection value: 17800 W
-
Connected load: 15 W
-
Voltage: 220-240 V
-
Minimum voltage : 220 V
-
Maximum voltage: 240 V
-
Frequency: 50; 60 TPU00040
-
Minimum frequency: 50
-
Maximum frequency: 60
- Length of connection cable b>: 140.0 cm
-
Plug type: Schuko/Gardy.with earthing
-
Device width: 90.8 cm< /li>
-
Device depth: 52 cm
-
Height of packaged device: 28 cm
-
Width of packaged device : 70 cm
-
Depth packed product: 101 cm
-
Minimum niche height: 14.1 cm li>
-
Maximum niche height: 14.1 cm
-
Minimum niche width: 88.6 cm
-
Niche width maximum: 88.8 cm
-
Niche depth: 49.1 cm
-
Net weight: 30.3 kg
-
Gross weight: 33.1 kg
-
Energy-intelligent device, can optimize consumption behavior (2017/1369/EU): No
-
Wireless communication possible: No
-
Network broadband technology: Not applicable
-
SIM -Card slot available: No
-
Type of interface for control: No
-
Possibility of remote upgrade: No
-
Dimensions of the cooking zone: 32 cm
-
Power of the cooking zone: 0.3-5.8 W
- Operation indicator light: Yes
-
Control: Continuous energy regulation
-
Cover type: Without
< li>Type of pot support: Cast pot support-
Type of gas safety device: Central electronic safety device
-
Ignition : Yes
-
Residual heat indicator: Disconnected
-
Main switch: No
-
Safety devices: automatic re-ignition, electronic. Flame monitoring, safety valve
-
Electronic clock: No
-
Included accessories: 1 x wok attachment ring
-
Possibility of combining cooking zones/areas: No
-
Prevent boiling over with cooking sensor: No
-
Flexible induction technology supported : No
-
Hob with booster function: No
-
Temperature control for perfect frying results : No
-
Cord included: Yes
-
Wok burner supported: Yes
-
COMBINED_NOMENCLATURE_CODE : 73211190
