Gaggenau VG425215, Series 400, Vario gas hob, 38 cm, natural gas 20 mbar

Gaggenau VG425215, Series 400, Vario gas hob, 38 cm, natural gas 20 mbar

SKU: VG425215

2.931,00 €

incl. 19% VAT , (Spedition)

only 2872,38 € for payment in advance / minus 2% discount

Delivery time: 8 - 10 Workdays (int. shipments may differ)

Unit od ac

Multi-circuit burner, up to 4 kW
Fully electronic level control in 12 power levels
Solid stainless steel knob, also available with a black, robust surface, for precise control and personalization
li>
Precisely processed 3 mm thick stainless steel
Choice of surface-mounted installation with a visible edge or discreetly integrated flush with the surface

further details

Multi-circuit burner, up to 4 kW
Fully electronic level control in 12 power levels
Solid stainless steel knob, also available with a black, robust surface, for precise control and personalization
Precisely processed 3 mm thick stainless steel
Choice of surface-mounted installation with a visible edge or discreetly integrated flush with the surface
Exactly adjustable and reproducible flame sizes
Automatic rapid ignition, electronic flame monitoring with automatic re-ignition
Simmer setting for simmering at the lowest power level
Smooth cast iron grates
Can be perfectly combined with other Vario devices from the 400 series

Cooking zones

1 powerful burner with 2 flame circles (165 W - 4000 W), suitable for pots up to a maximum diameter of 28 cm.
1 normal burner with 2 flame circles (165 W - 2000 W), suitable for pots up to a maximum diameter of 24 cm.

Operation

Control knob with illuminated ring, cooking zone and power marking.
One-handed operation.
Fully electronic control for precise regulation of the 12 power levels plus simmer level.
Automatic quick ignition.

Equipment

Simmering level.
Cast grate with flat, continuous pot surface.
Burner rings made of brass.

Safety

Residual heat display.
Safety shutdown.

Planning information

Depending on Installation type (top-mounted or flush, with or without device cover) pay attention to the specific definition of the cutout and the toggle positions.
If the panel thickness exceeds 23 mm, the sketch "Mounting the control toggle" must be observed (the back must be left out ).
When combining several Vario devices from the 400 series, a VA 420 connecting strip must be used between the devices. Depending on the type of installation, provide appropriate connecting strips.
The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take the weight of the device including additional load into account.
Additional information for flush installation:
The installation is suitable for worktops made of stone, synthetic material or solid wood. Heat resistance and waterproof sealing of the cut edges must be taken into account. For other materials, please consult the worktop manufacturer regarding use.
The groove must be continuous and even to ensure that the devices rest evenly on the seal. Do not use selective lining.
The joint width can vary due to dimensional tolerances of the combinations and the worktop cutout.
When installing several devices in individual cutouts, a web width of 50 mm must be planned between the individual cutouts.
Special nozzles must be ordered as spare parts.
Provide an electrical connection (the device cannot function without a power supply).
Air intake from above.
The back wall and wall trim strips must be heat-resistant and made of non-combustible material.
Maintain a lateral distance to heat-sensitive furniture parts or surfaces of at least 150 mm or install heat-insulating insulation .
When operating alongside the VL 414 downdraft ventilation, the AA 414 air guide rail is recommended to ensure the maximum performance of the hob.
If the total output of the installed gas hobs is over 11 kW, the local regulations apply with regard to room ventilation, room size and combination with extractor hoods in exhaust or recirculation mode.
The minimum distance from the hob surface to a piece of furniture made of combustible material mounted above it is 70 cm.
The minimum distance to A built-over extractor hood must be taken into account when planning the individual extractor hood.
The device can be snapped into the worktop from above.
Appliance weight: approx. 13 kg.

Connection data

Total connection value gas 6.0 kW.
Total connection value electric 15 W.
Connection cable 1.4 m with plug.

Color:	stainless steel
Product type:	Hob module
Device width:	40cm
Controls:
Item weight:	13,00 kg
brand:	Gaggenau
Modellbezeichnung:	VG425215
Skala Energieeffizienzklasse:	A+++ bis D
Marke laut ElektroG (EAR):	Gaggenau
Geräteart laut ElektroG:	Großgeräte, die in privaten Haushalten genutzt werden können.
WEEE-Reg.-Nr. DE:	57986696

Product safety information

Manufacturer information:

BSH Hausgeräte GmbH
Carl-Wery-Straße 34
Bayern
München, Deutschland, 81739
www.bsh-group.com
https://www.bsh-group.com

Product series: Series 400
Design: Built-in
Control: Electronic
Energy source: Gas
Location of the control: Outside the device li>
Gas type: Ground H/E 20,E+ 20/25,L G25/25
Main surface material: Brushed stainless steel< /li>
Color of device: Stainless steel
Basic color of the product: Not applicable
Frame design b>: Professional, standard frame
Frame color: Stainless steel, stainless steel
Gas connection value: 6000 W
Connected load: 15 W
Voltage: 220-240 V
Minimum voltage: 220 V< /li>
Maximum voltage: 240 V
Frequency: 50; 60 TPU00040
Minimum frequency: 50
Maximum frequency: 60
Length of connection cable b>: 140.0 cm
Plug type: Schuko/Gardy.with earthing
Device width: 38 cm
Device depth: 52 cm
Height of packaged device: 30 cm
Width of packaged device b>: 50 cm
Depth of packaged product: 60 cm
Minimum niche height: 13.4 cm
Niche height maximum: 13.4 cm
Niche width minimum: 35.9 cm
Niche width maximum : 36.1 cm
Niche depth: 49.1 cm
Net weight: 13.2 kg< /li>
Gross weight: 15.2 kg
Energy-intelligent device, can optimize consumption behavior (2017/1369/EU): No li>
Wireless communication possible: No
Network broadband technology: Not applicable
SIM card slot available: No
Type of interface for control: No
Possibility of remote upgrade: No< /li>
Dimensions of the cooking zone: 28 cm
Dimensions of the 2nd cooking zone: 24 cm
Power of the cooking zone: 0.165-4 W
Power of the 2nd cooking zone: 0.165-2 W
Location of the 2nd . Cooking zone: middle at the back
Type of the 2nd cooking zone: gas, normal burner
Operation indicator light: Yes< /li>
Control: Stepless energy control
Cover type: Without
Type of pot support: Cast pot support
Type of gas safety device: Central electronic safety device
Ignition: Yes
Residual heat indicator: Separate
Main switch: No
Safety devices: automatic re-ignition, electronic. Flame monitoring, safety valve
Electronic clock: No
Possibility of combining cooking zones/areas: No
Prevent boiling over with cooking sensor: No
Flexible induction technology supported : No
Hob with booster function: No
Temperature control for perfect frying results: No
Cord included: Yes li>
Wok burner supported: No
COMBINED_NOMENCLATURE_CODE: 73211190