2 zones can be switched separately or together
Cast pan, half surface, for simultaneous frying and grilling on two separate surfaces
Open cast iron grate, lava stones
Solid stainless steel toggle, also available with a black, robust surface, for precise control and personalization
Precisely processed 3 mm thick stainless steel

further details

2 zones can be switched separately or together
Cast pan, half surface, for simultaneous frying and grilling on two separate surfaces
Open cast iron grate, lava stones
Solid stainless steel knob , also available with a black, robust surface, for precise control and personalization
Precisely processed 3 mm thick stainless steel
Choice of surface-mounted installation with visible edge or discreetly integrated flush with the surface
Can be perfectly combined with other Vario devices from the 400 series

Operation

Equipment

Hob, lava stone tray and fat drip tray made of stainless steel.
2 zones with 1500 W each , can be switched together as a whole area or individually as half an area.
Two-part cast steel grill grate.

Safety

Planning information

Depending on the type of installation (top-mounted or flush, with or without device cover) on the specific Pay attention to determining the cutout and the toggle positions.
When installing with the VA 440 device cover, the additional space required in the depth must be taken into account.
When combining several Vario devices from the 400 series, one must be used Connecting strip VA 420 can be used between the devices. Depending on the type of installation, provide appropriate connecting strips.
The load-bearing capacity and stability, especially with thin worktops, must be ensured by suitable substructures. Take the weight of the device including additional load into account.
Additional information for flush installation:
The installation is suitable for worktops made of stone, synthetic material or solid wood. Heat resistance and waterproof sealing of the cut edges must be taken into account. For other materials, please consult the worktop manufacturer regarding use.
The groove must be continuous and even to ensure that the devices rest evenly on the seal. Do not use selective lining.
The joint width can vary due to dimensional tolerances of the combinations and the worktop cutout.
When installing several devices in individual cutouts, a web width of 50 mm must be planned between the individual cutouts.
Maintain a lateral distance of at least 100 mm from heat-sensitive furniture parts or the wall.
The device can be snapped into the worktop from above.
Device weight: approx. 25 kg.